en2 ? series sealed connectors new product bulletin 601 features & benefits ? sealed to ip68, nema 250 (6p) (when mated) ? available in standard or winged coupling ring ? patented grommet and o-ring free design ? solder/crimp and pc contact options applications ? any sealed data transmission ? military or industrial gps location devices ? instrumentation ? medical data carts ? marine applications ? transportation ? general industrial electronic applications please visit www.switchcraft.com for the most up-to-date product specifications. made in usa.
en2 ? series sealed connectors new product bulletin 601 please visit www.switchcraft.com for the most up-to-date product specifications. made in usa. mech anical s pecifications life: 600 insertion/withdrawal cycles minimum vibration: mil-std 202g method 201a hex nut torque: 5-6 in/lb operating forces: 8 lb maximum insertion. 0.25 lb minimum withdrawal back shell type: threaded handle e lectrical s pecifications voltage rating: 250 v ac/dc for 2 contact arrangement. 125 v ac/dc for 3-7 contact arrangements current rating: refer to current rating table on page 3 insulation resistance: 1000 m minimum contact resistance: 10 m maximum env ironmental s pecifications operating temperature limits: -40?c to +85?c (-40?f to +185?f) moisture resistance: mil-std 202g method 106g insulation resistance: mil-std 202g method 302 condition b thermal shock: mil-std 202g method 107g salt atmosphere (corrosion): mil-std 202g method 101e condition b weathertight ratings: ip16, ip18, ip66, ip67, ip68 per iec60529. nema 250 (6p), cfr 46 part 110.20 m aterial s pecifications connector housing: thermoplastic, black hex nut: thermoplastic, black coupling ring: thermoplastic, black cable clamp: thermoplastic, black handle (back-shell) thermoplastic, black insulator: elastomer, black seal grommet: elastomer, black contacts: copper alloy, plated specification s ordering code consult factory for cable to cable (inline) type connectors. en2 connector type: c - cord p - panel # of contacts: 2-3 for #20 4 for #22 5 - 7 for #26 gender: m - male f - female contact size: 20 - #20 22 - #22 26 - #26 contact style: leave blank for solder or crimp p - pc tail (panel connectors only) packaging options: leave blank for bulk k - kit (one unit/bag) grommet code - cable o.d. range: (cord only) dc - daisy chain (all 3 sizes) g1 - 0.100-0.140 (2.5-3.6) g2 - 0.140-0.180 (3.6-4.6) g3 - 0.180-0.220 (4.6-5.6) coupling ring options (cord only): leave blank for ribbed w - winged
en2 ? series sealed connectors new product bulletin 601 please visit www.switchcraft.com for the most up-to-date product specifications. made in usa. en 2 ? series c urrent rating table contacts wire (awg) current rating (a) at operating temperature ( ?c) 45?c max 55?c max 65?c max 75?c max 85?c max 2 #20 20 7 6 5 4 3.5 22 5.5 5 4 3 2.5 24 5.5 5 4 3 2.5 26 4 3.5 2.5 2 1 3 #20 20 6.5 5.5 4.5 3.5 2 22 5 4.5 3.5 3 1.5 24 5 4.5 3.5 3 1.5 26 3 2.5 2 1.5 0.5 4 #22 20 5 4.5 3.5 3 1.5 22 4.5 4 3 2 1 24 4.5 4 3 2 1 26 3 2.5 2 1.5 0.5 5-7 #26 26 3 2.5 2 1.5 1 28 2.5 2 1.5 1 0.5 30 2 1.5 1 0.5 0.5 en 2 ? c ontact c rimping t ools handle description positioner contact sizes wire sizes en 3 cr crimp hand tool en2pos20 #20, #22 20, 22 awg en3pos26 #26 26, 28, 30 awg en 3 crauto pneumatic crimp tool en2pos20 #20, #22 20, 22 awg en3pos26 #26 26, 28, 30 awg en2 ? ins ertion / e xtraction t ools part number contact sizes description EN3INS20 #20, #22 insertion / extraction tool for 20, 22 awg en3ins26 #26 insertion / extraction tool for 26, 28 & 30 awg en 2 ? a lternate l arger f rame t ool handle description positioner contact sizes wire sizes en2crl hand tool en2pos20l #20, #22 20-22-24-26 awg en2crautol pneumatic tool
en2 ? series sealed connectors new product bulletin 601 please visit www.switchcraft.com for the most up-to-date product specifications. made in usa. panel mount du s t cap part # 16295 cord
en2 ? series sealed connectors new product bulletin 601 please visit www.switchcraft.com for the most up-to-date product specifications. made in usa. en2 ? cord connector field a ss embly ins tructions 0.375 9.5 max 0.1880.015 4.80.4 feed the free end of cable through the handle, cable-clamp/grommet, and coupling ring in the order shown. strip cable end and conductors as shown. soldering or crimping conductors to contacts is recommended before insertion into connector. if crimping, use hand or pneumatic crimp tool with crimp positioner per contact size. if soldering after contacts are inserted in the connector, limit exposure of contacts to soldering iron temperature to 4 sec. maximum. soldering iron temperature should not exceed 650f (343c). insert wired contacts into connector housing using an insertion tool and per contacts arrangements. align coupling ring over housing and bring forward. align cable-clamp/grommet on the rear of housing. make certain grommet is completely inside the cable-clamp in the nal position. bring forward and thread handle onto housing until tight. do not exceed 2 in-lb torque. en2 cord connector field assembly instructions:
en2 ? series sealed connectors new product bulletin 601 please visit www.switchcraft.com for the most up-to-date product specifications. made in usa. en2 ? panel connector field a ss embly ins tructions 0.375 9.5 min. 0.1880.015 4.80.4 en2 panel-mount connector contacts solder or crimp cable 0.25 6.4 max panel thickness strip cable end and conductors as shown. soldering or crimping conductors to contacts is recommended before insertion into connector. if crimping, use hand or pneumatic crimp tool with crimp positioner per contact size. if soldering after contacts are inserted in the connector, limit exposure of contacts to soldering iron temperature to 4 sec. maximum. soldering iron temperature should not exceed 650f (343c). insert wired contacts into connector housing using an insertion tool and per contacts arrangements. align and install connector into panel cut-out. tighten hex nut 5 -6 in-lb. en2 panel connector field assembly instructions:
|
